How to Install Wood Fence Panels On Uneven Ground


A meaningful investment in your property is fencing. It provides safety, elegance, and a visible boundary of property limits. Installing a wood fence is a sensible approach to increase your home’s security. When planning to build a fence on your property, finding out that the ground is uneven might cause problems. If you want a wood fence, wood is more rigid and unbendable. Other materials, such as vinyl or metal, may bend with the grade.

Installation of Wood Fence on Uneven Ground

Installing a fence on uneven ground may seem very tough and inconvenient, but it’s not like that. A chalk line or ball of string is the most crucial equipment for such a task. Putting up the fence would be similar if you worked on flat ground.

Steps to Install Wood Fence on Uneven Ground

Here are steps to installing wooden fences on stepped or uneven ground.

  • Decide where to place each post hole as you plan the perimeter of your fence. No more than eight feet should separate the holes.
  • Configure the fence’s length. Depending on how much privacy you desire, A 6-foot fence and a 4-foot fence are very different from one another.
  • Prepare the post holes such that the tops of the posts are 6 to 8 inches or less below the fence’s planned height. Ensure that every post is straight. The 2-foot level is intended for this purpose.
  • Run the 2-by-4s around the fence’s perimeter after all the posts are in place. Two rows of 2-by-4s should be present, one at the top and one near the bottom of the post. While there shouldn’t be many variations in height at this stage, perfection is unnecessary. The 2-by-4s can be placed on the fence’s inner or outside edge.
  • One part at a time, install the longitudinal panels. Utilizing galvanized wooden screws, fix one vertical fence board directly to the 2-by-4s. Ensure that the board is precisely level and at the desired height. Install a temporary board at the same height 8 feet down the line. Ensure that the board is plumb, but keep in mind that it will ultimately come out.
  • From the top of one board to the top of the other, attach a tight string. Install the fence one board at a time, starting with the permanent board. Ensure that the string is flush with the top. Divide the difference on the string according to whether you are traveling uphill or downhill, but maintain each board level and straight. When the completion of span, take down the temporary board, walk 8 feet along the line, put it back up, and repeat the procedure. Repeat this along the perimeter of the fence enclosure. Make sure your stock’s overall length is greater than what you require so that you may make bottom adjustment cuts. Use a regular length board and adjust your overall height if a tight bottom is unnecessary.

Tips and Ideas for Wood fence

After constructing your fence, allow the treated wood to rest entirely before painting, staining, and sealing it. It takes to dry from a few weeks to a few months, but once water can penetrate the wood, it is ready for staining. Fence paint can preserve your fence and give it a striking appearance, while an exterior stain and sealer will protect your fence while preserving the beauty of the wood. You may select from a range of natural wood tones, a clear sealant, or a pre-tinted stain.

It’s a great thing to maintain your fence sometimes to get rid of dirt and grime to maintain it looking its best. An excellent tool for cleaning a wood fence is a pressure washer.

Things to consider while installing a wood fence in an Uneven area

Many things should be considered before, during and after the installation of a fence on uneven ground. A few are discussed below

Selection of Fence according to area

Firstly, overlook the characteristics and proceed with the fencing process if the fencing area has a modest slope. If the slopes are not steep, the impact will be apparent. Use stepped panels if the area of fencing involves sizable slopes. The stepped fence panels make it possible for the fence to be constant by allowing it to follow the slope. In this construction, every fence panel between the posts is positioned lower or higher than the one next.

Use of Rackable panels for uneven slopes

Using rackable panels is an additional choice. Since they take on a parallelogram shape rather than a rectangle, these fence panels are to adapt to uneven slopes. It makes it possible for the fence rails’ top and bottom halves to follow the gradient simultaneously.

Cost of Fence installation

Depending on the particular business, different fences cost different amounts to install. It also relies on the type of material and design chosen.

We hope you’ll find this article helpful. Share your views by commenting below.

Leave A Reply